Testing to ASTM Standards

Innovative Test Solutions, Inc. tests to a variety of different ASTM standards and procedures.

Methods are commonly cited for different materials used in applications, such as building materials, transportation materials and more.

ASTM testing standards are application-specific with established criteria for regional compliance.

Below is a list of standards in which we commonly perform. If you do not see the ASTM Standard you are looking for, please contact us or request a quote from our engineering team.

ASTM Standard Tests

A931
Standard test method for Tension testing of wire ropes and strand
B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
C97
Standard test methods for absorption and bulk specific gravity of dimension Stone
C297
Standard test method for flatwise tensile strength of Sandwich Constructions
C393
Standard test method for Core Shear Properties of Sandwich Construction by beam flexure
C623
Standard test method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Glass and Glass-Ceramics by Resonance
C633
Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C1161
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1198
Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
C1360
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
D638
Standard Test Method for Tensile Properties of plastics
D695
Standard Test Method for Compressive Properties of Rigid Plastics
D968
Standard Test Methods for abrasion resistance of Organic Coatings by Falling abrasive
D1894
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
D3702
Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact using a Thrust Washer Testing Machine
D5023
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three- Point Bending)
D7250
Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
E8
Standard Test Methods for Tension Testing of Metallic Materials
E9
Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E21
Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E132
Standard Test Method for Poisson’s Ratio at Room Temperature
E139
Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E143
Standard Test Method for Shear Modulus at Room Temperature
E466
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E606
Standard Practice for Strain-Controlled Fatigue Testing
G32
Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
G98
Standard Test Method for Galling Resistance of Materials
G99
Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

Speak With A Professional Today

Make an Inquiry or Request a Quote and our team will be in touch.

  • Impartiality shall be established by, all deliverables / test data, that will be, produced / reported / certified, as defined in the SOW / standards, cited in the proposal and controlled by the ITS Quality System. The confidentiality, of all data and/or other proprietary items produced by or in the possession of ITS, Inc will be maintained so as not to divulge or otherwise compromise the proprietary nature of any data, information, or items to any other, or only as authorized in writing by the customer, or customer’s contracting agent, requesting the data.

  • This field is for validation purposes and should be left unchanged.